Zepp2 - Tennis Support

Properly Mounting The Zepp Sensor

Last Updated -

FLEX MOUNT

To use the Flex Mount:

  1.  Wrap the mount around the butt of the racquet. Align the markings on the top of the mount with the face of the racquet.
  2. Align the Sensor with the markings on the attached mount


PRO MOUNT

To use the Pro Mount:

  1. Clear the butt cap of the racquet.
  2. Remove backing sheet from the mount.
  3. Press and hold the mount down for 10 seconds.
  4. Wait 24 hours before using.
  5. Insert Sensor into the mount and turn clockwise to lock into place.



INSERT MOUNT

The Insert Mount supports a wide variety of tennis racquets.
To use the Insert Mount:

  1. Check the link above to confirm your racquet is supported.
  2. Pop out butt cap with a screwdriver.
  3. Align and press mount firmly down until you hear a click.
  4. Insert Sensor into the mount and turn clockwise to lock into place.

Did you find this article helpful?

Contact Us

Hours of operation are Monday - Friday 8:00am - 5:00pm PST