Pair your GolfSense sensor via Bluetooth

Last Updated -

Connecting GolfSense to your Bluetooth enabled device is quick and easy.  To begin, turn on your GolfSense sensor by pressing the yellow button and holding for three seconds.  A blinking light will indicate that the device is on. Now you're ready to begin the pairing process.

Select the Settings application on your mobile device and then select "Bluetooth."  If Bluetooth is not enabled, make sure to turn it on.

Your iOS or Android device will automatically search for GolfSense. This will take approximately 15-30 seconds.  

Image.jpg

Once found, a pop up "Bluetooth Pairing Request" will appear. Select Pair. It will take approximately 15-30 seconds for GolfSense to pair with the device. When paired, your device will note GolfSense “Connected”. After connection has been established, another pop up will appear asking you to allow GolfSense to communicate with the ZEPP GolfSense App. Select Allow.

  

From this point on, your iOS device will automatically pair with GolfSense.  Unless if you turn bluetooth off or un-pair the GolfSense by selecting “Forget this Device”, you will not need to pair the device when you turn on your GolfSense.

IMPORTANT NOTE: Bluetooth technology only allows for GolfSense to be paired to one device at a time.  If you are using multiple devices, make sure that the device is properly paired and that Bluetooth is turned off on all other devices or unpaired.

Did you find this article helpful?

Contact Us

Hours of operation are Monday - Friday 8:00am - 5:00pm PST