Zepp Sensor

Firmware Troubleshooting

Sometimes when updating the sensor firmware, the signal can be interrupted, and the sensor will get stuck in a firmware update. Luckily, such issues are able to be resolved in 99% of cases where they occur. If...

How to Turn Your Sensor On/Off

Prior to use, we recommend fully charging your Zepp sensor. When you take the sensor out of the charger the sensor will turn off. To turn it on, press in from the side towards the LED channel (see image). You s...

Charging the Zepp sensor

To charge your Zepp Sensor, insert the sensor into the USB charging dock. Make sure the clear plastic film protecting the contact points (the copper “dots” on the bottom of the sensor) has been removed prior to...

Attaching the Zepp sensor to your bat

To attach the sensor to your bat you'll first need to attach the rubber Zepp bat mount. Stretch mount over the end of the bat handle and fit it securely in place. With the Zepp sensor turned on, push the sens...

Calibrating your Zepp 1 Sensor

To obtain the most accurate swing metrics, we recommend calibrating the device at the beginning of each practice session. In the 3D View, tap the sensor icon in the upper left part of the screen. Follow the in...

Sensor Reset

The sensor reset helps the accelerometer and gyroscope in the sensor to improve 3D accuracy. This reset can be found within the settings located in the main menu. It is recommended to complete this reset when a...

Sensor Reset

The sensor reset helps the accelerometer and gyroscope in the sensor to improve 3D accuracy. This reset can be found within the settings located in the main menu. It is recommended to complete this reset when a...

Updating your Sensor's Firmware

When apps are updated in the App Store or Google Play, they will sometimes include a firmware update. Firmware updates will result in improved accuracy of the sensor and generally only take a couple minutes to ...

How to pair the Zepp Sensor to an iOS device via bluetooth

Pair your Zepp Sensor with your iOS or Android device Connecting the Zepp Sensor to your Bluetooth enabled device is quick and easy. To begin, charge your Zepp Sensor for 2-3 hours to ensure a full charge. ...

Contact Us

Hours of operation are Monday - Friday 8:00am - 5:00pm PST