Zepp2 - Tennis Support

Getting Started

Last Updated -

Welcome to Zepp, now that you have a Zepp 2 Sensor you’re ready to unlock secrets to your swing. This guide is intended to get you from first receiving the product, to capturing your first swing. Each Zepp kit comes with a USB charger, flex mount, pro mount, insert mount, and a Zepp 2 sensor. Let’s get started!

1. Charge your Sensor

  1. Remove the sensor from the packaging 
  2. Insert the USB charger into any USB port (computer or wall adapter) and place the sensor into the magnetic charger.
  3. Allow sensor to fully charge prior to use to avoid any issues related to low battery. A full charge may take up to 1.5 hours to complete, and the sensor will indicate it is fully charged when the green LED is shown through the charger.

2. Download the Free App (iOS or Android)

  1. Locate either the App Store or Play Store (iOS / Android respectively) on your mobile device, and open it.
  2. In the search bar, search "Zepp Tennis."
  3. Select either Get, Download, or the cloud icon (Varies depending on device) to begin the app download. 

3. Setup your Zepp Account

  1. Open up the app, and select “sign up.”
  2. Create a Zepp account by entering your email address. Then click the sign up
  3. In the "My Account" section put your first/last name and password. Then tap on the "next" button.
4. Turn on your Sensor
  1. Hold the power button down for 4 seconds. 
  2. The white LED will flash twice indicated that the sensor is turned on.

5. Connect your Sensor

  1. Turn your sensor on.
  2. The sensor name will show up in Sensor List
  3. Tap on the sensor name in the list. Once you do that the sensor will be connected. 
  4. In the "My Sensor" menu you can see your sensors battery level, if there is a firmware update available or you can rename the sensor ID name. 

6. Mount your Sensor


To use the Flex Mount:

  1.  Wrap the mount around the butt of the racquet. Align the markings on the top of the mount with the face of the racquet.
  2. Align the Sensor with the markings on the attached mount.


To use the Pro Mount:

  1. Clear the butt cap of the racquet.
  2. Remove backing sheet from the mount.
  3. Press and hold the mount down for 10 seconds.
  4. Wait 24 hours before using.
  5. Insert Sensor into the mount and turn clockwise to lock into place.


To use the Insert Mount:


  1. Check the link above to confirm your racquet is supported.
  2. Pop out butt cap with a screwdriver.
  3. Align and press mount firmly down until you hear a click.
  4. Insert Sensor into the mount and turn clockwise to lock into place.

7. Start Playing! 

  1. Go to your Record screen, select a court, invite your playing partners, and start your match.
  2. All swing information will automatically be recorded and viewable in your History, once you have completed your match.

Did you find this article helpful?

Contact Us

Hours of operation are Monday - Friday 8:00am - 5:00pm PST