How to update the firmware

Last Updated -

In order to update the sensor's firmware go to the sensor management menu. Make sure that you pair your sensors using the QR code on the back of the sensor and your bluetooth is enabled on the mobile device.

You will see a "update your sensor firmware" message on the top of the screen in the sensor management screen.

Simply tap on the firmware banner to start the firmware process. Before firmware starts make sure 
that the sensor is fully charged and within 3 yards of your mobile device. 

Tap on start to begin. 

Please note: Updating the firmware takes around 1 min per sensor. If you are updating a box of sensors it will take roughly 32 mins (32 sensors)

Did you find this article helpful?

Contact Us

Hours of operation are Monday - Friday 8:00am - 5:00pm PST